It is currently Sat Feb 24, 2018 8:37 am

All times are UTC+02:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Fri Jan 05, 2018 12:31 pm 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Jan 13, 2010 11:05 pm
Posts: 21
Location: Oslo, Norway
I've been a huge fan of Sabine Wren since I first saw her, and now I'm finally going to make a costume of her. My only other costume is Juno Eclipse, and I envy everyone going around with at bucket.

So here goes...
First step: Lots of research. I've been studying the reference library images found at the Rebel Legion Costume reference page: http://newsite.rebellegion.com/sabine-wren-series-3-action-gearheavy-armour/

Image

From the Rebel Legion forums I found out that Mandalorian Arsenal was a good place to get the armor kit, so I ordered from them http://themandalorianarsenal.com/armor.html#Sabine. They estimated 8 weeks production time, which they stuck to. I ordered my armor 13th of October 2017, and received it before Christmas (my package got stuck in Norwegian customs for over a week).
Image

Sadly there are no tutorials for her build on the Rebels forum, so I'll rely on my experience from building a 501st clone trooper for my husband. My first idea now is to do more research:
1. What kind of fabric do I need for the shirt and pants
2. Find out all the paint colors I need, how much and what kind

_________________
Let the wookie win.


Top
   
PostPosted: Fri Jan 19, 2018 3:36 pm 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Jan 13, 2010 11:05 pm
Posts: 21
Location: Oslo, Norway
I've been talking to some nice ladies on the Rebel Legion forum about the fabric used for Sabine Wrens top. It is black (I thought it was dark grey first), but it is a rougher and not so shiny quality. There are also light grey details and I got the same kind of fabric in a lighter shade. I think I found the perfect fabric and I am super happy :) I also bought a whole lot of colors from Humbrol (which was a tip from a "dellow felegate" :D

Image

_________________
Let the wookie win.


Top
   
PostPosted: Fri Jan 19, 2018 3:44 pm 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Jan 13, 2010 11:05 pm
Posts: 21
Location: Oslo, Norway
I am totally new to airbrushing. And the Sabine Armor is a whole lot of airbrushing. Therefore I thought I would start with something simple so that I may practice. And if I totally screw it up, I can just sand it down and start over again. So I chose to start on the elbows.
They are to be orangy-with a dark brown/reddish background and also metallic underneath.

Image

First off I marked my elbows. There are 4 pieces in total, two on the left and two on the right. I cut off the excess plastic and sanded them down all nice and smooth.
Image

Then I primed them.
Since it is winter now, and I do not have any good places to spray, I found out that spraying inside this box worked pretty well:

Image

And today was my first test with the airbrush:
Image

It was a lot harder than I thought it was going to be. I thought I would have more precision and control, but I guess that comes after a while with practice :)

_________________
Let the wookie win.


Top
   
PostPosted: Mon Jan 22, 2018 10:11 pm 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Jan 13, 2010 11:05 pm
Posts: 21
Location: Oslo, Norway
I checked on my elbows today, and noticed that when I dragged my nail along the paint, it came off. :( And this is with primer on the bottom. I am a little afraid that the Humbrol Enamel paint won't stick. I sanded them down today and started over with a spray I have previously used for Hennings Clone Armor. I am hoping that the Humbrol paint will stick to this better. Also, the weathering solution I bought and tried didn't work at all. So I am back to using toothpaste.

Image

I've also started to sew the top. I took an existing pattern I had and modified it. It looks quite good so far. I even managed the tricky corners by sewing and clipping :)

Image

Image

_________________
Let the wookie win.


Top
   
PostPosted: Tue Jan 23, 2018 4:31 am 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Apr 20, 2011 5:09 pm
Posts: 529
antispamfield: No
Could be that the primer you used on the plastic did not work. I used plastic primer bought from Motonet, and also used Humbrols.

After painting the layered paints on my Fett are still there. Hope the other primer is better.

_________________
'Use the sense, it is a force attribute. Common as it is, among us all.'


Top
   
PostPosted: Thu Jan 25, 2018 12:09 pm 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Jan 13, 2010 11:05 pm
Posts: 21
Location: Oslo, Norway
BH-11380 wrote:
Could be that the primer you used on the plastic did not work. I used plastic primer bought from Motonet, and also used Humbrols.

After painting the layered paints on my Fett are still there. Hope the other primer is better.


It seems, so far, that the new coat sticks to the plastic well. I am in the process of painting the shoulders now (layer upon layer upon layer) and hoping that the results will look awesome.
Are you having trouble with coverage with the humbrol paint? I noticed that when I wanted to paint orange over the silver metallic that even after three coats that the orange seemed dark and murky. So now I am trying to paint with a yellow first and then the orange on top.

_________________
Let the wookie win.


Top
   
PostPosted: Sun Jan 28, 2018 4:28 pm 
Offline
Nordic Garrison trooper
Nordic Garrison trooper
User avatar

Joined: Wed Jan 13, 2010 11:05 pm
Posts: 21
Location: Oslo, Norway
The Elbows are finished! I think they look pretty sweet. But if any of you have any comments, please say so :)

I used toothpaste as weathering. This has proven to work well in the past. So after I painted the silver/metallic I added toothpaste to the areas where I wanted the metal (and the brownish color) to come through. And thereafter I painted the elbows yellow so that the top color would seem brighter. I used a regular paint brush to evenly distribute the color. I wasn't too concerned about the brush strokes as there will be a top coat of a different color.

Image

On top of the yellow I painted the orangy color. I used some time to get the color right, and found out that I needed red, yellow and a little bit of pink :)

Image

After all the paint was dry, I scraped off the places where the toothpaste was. The metallic had, in some areas, become white-ish. So I topped up the metallic with a brush afterwards. I think the end result looks good :)

Image

_________________
Let the wookie win.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC+02:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Limited